Ganito po ang gagawin para mapagana ang prov file.
download the prov file below then extract
ipasa sa phone via bluetooth device or kung walang bluetooth ang PC
ay ipasa muna sa isang phone ang prov file using data cable
iforward naman sa s40 na phone
(phone mo)ang prov file via bluetooth
pag may lumabas na invalid settings ay wag nyo nalang pansinin
goto SETTINGS>CONFIGURATION>choose "smart prepaid" or "globe prepaid"(depende sa network) as DEFAULT
choose act. def. in all apps>YES
choose "smart internet"/"globe INET" as preferred access point
done
download first the attachments exempt the attached proxies
The old school method --> the advantage of this is that the prov files made here will be complete with web, mms, stream settings
extract to folder the network that youll be making a provisioning file
open the "maker.bat" **notice that the command promt and notepad will open, just dont close the command promt(it will be our compiler)
in your notepad you will see this, take note that you will only change the values that are indicated in red font
Quote:
<?xml version="1.0"?>
<!DOCTYPE wap-provisioningdoc PUBLIC "-//WAPFORUM//DTD PROV 1.0//EN" "http://www.wapforum.org/DTD/prov.dtd">
<wap-provisioningdoc version="1.0">
-->
the red stands for the prov file name when installed on your phone, you can change it to any name you want
<characteristic type="BOOTSTRAP">
<parm name="NAME" value="atheniankid prov">
</parm>
</characteristic>
<characteristic type="APPLICATION">
<parm name="APPID" value="w2">
</parm>
<parm name="TO-PROXY" value="myGlobe INET">
</parm>
<parm name="NAME" value="myGlobe INET">
</parm>
<characteristic type="RESOURCE">
<parm name="URI" value="http://wap.globe.com.ph/">
</parm>
<parm name="STARTPAGE">
</parm>
</characteristic>
</characteristic>
<characteristic type="NAPDEF">
<parm name="NAPID" value="myGlobe MMS">
</parm>
<parm name="NAME" value="myGlobe MMS">
</parm>
<parm name="BEARER" value="GSM-GPRS">
</parm>
<parm name="NAP-ADDRESS" value="mms.globe.com.ph">-->MMS's APN
</parm>
<parm name="NAP-ADDRTYPE" value="APN">
</parm>
<characteristic type="NAPAUTHINFO">
<parm name="AUTHTYPE" value="PAP">
</parm>
</characteristic>
</characteristic>
<characteristic type="PXLOGICAL">
<parm name="PROXY-ID" value="myGlobe MMS">
</parm>
<parm name="NAME" value="myGlobe MMS">
</parm>
<characteristic type="PXPHYSICAL">
<parm name="PHYSICAL-PROXY-ID" value="myGlobe MMS">
</parm>
<parm name="PXADDR" value="203.177.42.214">-->MMS's proxy
</parm>
<parm name="PXADDRTYPE" value="IPV4">
</parm>
<parm name="PUSHENABLED" value="0">
</parm>
<parm name="TO-NAPID" value="myGlobe MMS">
</parm>
<characteristic type="PORT">
<parm name="PORTNBR" value="8080">
</parm>
</characteristic>
</characteristic>
</characteristic>
<characteristic type="APPLICATION">
<parm name="APPID" value="w4">
</parm>
<parm name="TO-PROXY" value="myGlobe MMS">
</parm>
<parm name="NAME" value="myGlobe MMS">
</parm>
<parm name="ADDR" value="http://192.40.100.22:10021/mmsc">
</parm>
</characteristic>
<characteristic type="NAPDEF">
<parm name="NAPID" value="myGlobe INET">
</parm>
<parm name="NAME" value="myGlobe INET">
</parm>
<parm name="BEARER" value="GSM-GPRS">
</parm>
<parm name="NAP-ADDRESS" value="http.globe.com.ph">-->INET's APN
</parm>
<parm name="NAP-ADDRTYPE" value="APN">
</parm>
<parm name="INTERNET">
</parm>
<characteristic type="NAPAUTHINFO">
<parm name="AUTHTYPE" value="PAP">
</parm>
</characteristic>
</characteristic>
-->this is our settings for myGlobe INET, below are the proxy and port in red, change them
<characteristic type="PXLOGICAL">
<parm name="PROXY-ID" value="myGlobe INET">
</parm>
<parm name="NAME" value="myGlobe INET">
</parm>
<characteristic type="PXPHYSICAL">
<parm name="PHYSICAL-PROXY-ID" value="myGlobe INET">
</parm>
<parm name="PXADDR" value="203.177.91.131">
</parm>
<parm name="PXADDRTYPE" value="IPV4">
</parm>
<parm name="PUSHENABLED" value="0">
</parm>
<parm name="TO-NAPID" value="myGlobe INET">
</parm>
<characteristic type="PORT">
<parm name="PORTNBR" value="80">
</parm>
</characteristic>
</characteristic>
</characteristic>
<characteristic type="ACCESS">
<parm name="RULE" value="Default Rule">
</parm>
<parm name="TO-PROXY" value="myGlobe INET">
</parm>
</characteristic>
-->this is our settings for myGlobe Stream, below are the proxy and port in red, change them
<characteristic type="NAPDEF">
<parm name="NAPID" value="myGlobe Stream">
</parm>
<parm name="NAME" value="myGlobe Stream">
</parm>
<parm name="BEARER" value="GSM-GPRS">
</parm>
<parm name="NAP-ADDRESS" value="real.globe.com.ph">-->real stream's APN
</parm>
<parm name="NAP-ADDRTYPE" value="APN">
</parm>
<characteristic type="NAPAUTHINFO">
<parm name="AUTHTYPE" value="PAP">
</parm>
</characteristic>
</characteristic>
<characteristic type="PXLOGICAL">
<parm name="PROXY-ID" value="myGlobe Stream">
</parm>
<parm name="NAME" value="myGlobe Stream">
</parm>
<characteristic type="PXPHYSICAL">
<parm name="PHYSICAL-PROXY-ID" value="myGlobe Stream">
</parm>
<parm name="PXADDR" value="203.177.91.131">
</parm>
<parm name="PXADDRTYPE" value="IPV4">
</parm>
<parm name="PUSHENABLED" value="0">
</parm>
<parm name="TO-NAPID" value="myGlobe Stream">
</parm>
<characteristic type="PORT">
<parm name="PORTNBR" value="80">
</parm>
</characteristic>
</characteristic>
</characteristic>
<characteristic type="APPLICATION">
<parm name="APPID" value="554">
</parm>
<parm name="TO-NAPID" value="myGlobe Stream">
</parm>
<parm name="NAME" value="myGlobe Stream">
</parm>
<parm name="MIN-UDP-PORT" value="6970">
</parm>
<parm name="MAX-UDP-PORT" value="7170">
</parm>
</characteristic>
</wap-provisioningdoc>
Window based maker -->
super basic maker, advisable for newbies at sa nahihilo sa old school method
disadvantage: hindi pwedeng isama dito ang streaming settings, hiwalay mo pa syang gagawin at kung makagawa ka ng streaming settings wala syang advance settings para sa band ng stream
